CDLR2511 - Heavy duty roller conveyor

CDLR25 – CHAIN DRIVEN ROLLER, 2511 SERIES

EFFECTIVE WIDTH: 6″ – 60″

LENGTH: 48″ – 900″

BEGINNING ELEVATION: 7″ – 120″

ENDING ELEVATION: 7″ – 120″

SPEED: 10 – 150 FPM

ROLLER CENTERS: 4.5″, 6″, 9″, 12″

ROLLERS: 2.50″ diameter x 11ga. wall tube with 11/16″ hex cold rolled steel axels, spring retained, with precision, greased packed bearings.

DRIVE: Standard drive is mounted high near center of conveyor length on chainbox side. Optional drives include drive mounted low or drive mounted below and within, near center.

FRAME: Standard frame includes 6” channel on chain box side and 4” channel on opposite side with roller set high in frame. Optional frame options include 6” channel on opposite side with roller set low in the frame, or structural 6@8.2# & 4@5.4# with rollers set high, or structural 6@8.2# both sides with roller set low.

MOTOR: 1/2 HP through 2 HP. Energy efficient and inverter duty motors also available. Voltages include 120/1/60, 230/3/60, 460/3/60 and 575/3/60 & DC Voltage.

ROLLER COVERS: Standard roller surface is carbon steel. Optional roller covers for 2.5″ rollers includes galvanized roller tube, polyurethane roller sleeves, Ultrex accumulation sleeves.

SUPPORT CENTERS: Standard supports are floor supports on 5’ center.

CONVEYOR COLOR: OSHA safety blue powder (RAL 5017). All guarding is yellow (RAL 1023) and moving parts are bright red orange (RAL 2008). Optional colors available.