The online configurator is intended to allow users to configure the conveyor and options they need, which speeds up the RFQ process. Note: The configurator does not generate pricing.
Who Are You?
Product Type to Configure?
A customer approached LEWCO, Inc., requiring a double level CDLR system for handling EV batteries and racks. The lower level was the infeed accumulation conveyor for the full racks (3 batteries). The upper level was the discharge accumulation conveyor for the empty racks but designed to be able to convey the occasional full rack, too. …
Read More “Over and Under CDLR Battery Rack System with Shuttle Car”
A customer needed a way to automatically convey his products into the next phase of manufacturing. However, they also needed personnel access to the machinery from time to time, and this new conveyor would be in the way. We discussed gate sections but the conveyor width made that impractical. The customer needed non-marking rollers, about …
Recently, LEWCO was asked to move product between several queue stations with a transfer car. The load was substantial, 60” square and up to 4,000 lbs. Our engineers worked with the customer to provide heavy-duty Chain Driven Live Roller conveyors with 3.5” diameter .300” wall rollers. The same conveyor was mounted to a powered transfer …
Read More “LEWCO Heavy Duty Transfer Car for Furnace Application”
A long-time customer of LEWCO came to us needing to service multiple lanes of product in 15”x24” plastic totes, stacked four high, weighing up to 250 lbs per stack. Each lane was actually two independent tote lanes, mounted together in wide supports. Poly-V roll-to-roll belts were used for positive drive and a quiet system. Zones …
LEWCO recently provided a Cookware manufacturer with a system of Heavy Duty Multi-Strand Chain Conveyor and a Powered Transfer Car with Heavy Duty Multi-Strand Chain Conveyor on top to move custom fixtures that weigh 8,000 lbs. each to different machine locations. This system had to be designed around customers’ existing floor plan and equipment. LEWCO …
LEWCO recently supplied a commercial wood door manufacturer with a Powered Transfer car featuring Dual Lane Chain Driven Live Roller on top. The area where wood cores come into production is hundreds of feet away from the machines that fabricates them into customer orders, causing slow cycle times due to distance. Each wood stack weighs …
LEWCO Inc. recently developed and delivered a custom Powered Chain Driven Live Roller Conveyor mounted to a lift table for a leading manufacturer of building panels. The customer uses this piece of equipment as a ‘buffer zone’ at the end of the production line, where the panels are coated and then stacked. A completed stack …
Read More “LEWCO’s Custom Powered Chain Driven Live Roller Conveyor with Lift Table”
LEWCO Inc. recently developed and delivered a custom Powered Transfer Car with Chain Driven Live Roller Conveyor for a leading manufacturer of doors and countertops. Along with the Transfer Car, LEWCO also constructed a pivoting Chain Driven Live Roller Conveyor. The Customer has raw materials called bunks of wood weighing up to 4,000 pounds that …
Read More “LEWCO Custom Power Transfer Car and Pivot Conveyor with Chain Driven Live Roller Deck”
LEWCO Model TC1916 medium duty manual transfer cars allow product to be moved from one lane to another parallel lane within a system. These units are fixed to a set of tracks which facilitate easy movement and positioning in front on the lanes to be loaded or unloaded from the car. LEWCO 1.9″ Diameter 16 ga. …
