The online configurator is intended to allow users to configure the conveyor and options they need, which speeds up the RFQ process. Note: The configurator does not generate pricing.
Who Are You?
Product Type to Configure?
A LEWCO Integrator has a customer who has an existing parts washer conveyor. They needed to return the round shaped metal parts back to the beginning of the line. The product rate and somewhat wet part surface precluded a belt or chain transfer. As happens often, space was at a premium; there was not enough …
The customer was presented with the challenge of ergonomically accessing all four sides of light weight sheet metal products that were lacking real structural integrity. The parts ranged from 5” wide to 60” wide, and from 59” to 80” long, in a ten cell assembly line. Together, we developed a 24VDC driven PLV19 powered …
A premium manufacturer needed to move large aluminum dies between processes. To maximize floor space the system was suspended from the roof structure, and accessed via vertical lifts to each work area at floor level. Overhead space was limited, so transfer and turntable units were custom-designed to fit the required envelope. The conveyor equipment was …
An automotive supplier had a very tight space to manage the movement and storage of the product racks. The existing AGV’s dropped off and picked up the racks. The customer needed some product buffer on both the infeed and exit portions of the line. Additionally, the operator interface required that the racks be oriented for …
Read More “LEWCO Ergonomic Container Handling & AGV Interface”
LEWCO recently provided an integrator with eight identical units from our LEWCO RED line which is specifically designed for the Retail E-commerce Distribution industries. These units are part of an automated hub for a popular parcel handling service where packages are routed through a complex system of conveyors resembling a maze of belts. To assist …
LEWCO recently provided a door manufacturer with a system of Poly-V Conveyors, Poly-V Pop-Up Belt Transfers, along with Multi-Strand Belt conveyors to handle doors in process from existing machines. LEWCO worked with the end user to design the system to fit the current floor plan while enhancing material flow within the existing manufacturing process. The …
Read More “LEWCO Enhances Manufacturing Flow for Door Handling with Poly-V System”
LEWCO recently provided an automotive supplier with a system consisting of: Poly-V Pop-Up Roller Transfer conveyor Multi-Strand Chain conveyor Pop-Up Chain Transfer conveyor Gravity conveyor This system handles totes of parts to be conveyed to two different operators. The totes are loaded onto the Multi-Strand Chain conveyor with a fork truck on the left or …
LEWCO’s Poly-v belt Driven Roller Conveyors feature roller assemblies with LEWCO’s Patented Grooved Hubs and Mounting Method, driven by matching Grooved Belts. This innovative combination provides a much more positive drive arrangement than “O-ring” driven rollers. LEWCO provides PLV19 (1.9” O.D.) and PLV25 (2.5” O.D.) models that, in certain configurations, can handle loads up to …
Recently LEWCO developed, tested, and delivered a process conveyor for a major appliance manufacturer. This conveyor was built to handle custom pallets holding multiple parts needed for final assembly. The rectangular pallet bottom needed to be introduced with narrow side leading, but delivered with wide side leading at the end of the line. This was …
LEWCO recently provided a tier two automotive supplier with a (5) zone 24VDC 2.5 Inch Diameter Poly V Driven Roller Conveyor line. The application requires shipping racks to be loaded on the entry end of the conveyor system. The racks are then indexed via lighted push buttons from zone to zone allowing operators to load …
Read More “LEWCO’s Five Zone 24VDC 2.5 Inch Diameter Poly-V Driven Roller Conveyor System”
