Model TC2511 heavy duty manual transfer car allow product to be moved from one lane to another parallel lane within a system. These units are fixed to a set of tracks which facilitate easy movement and positioning in front on the lanes to be loaded or unloaded from the car.
BETWEEN FRAMES: 15″ – 61″
LENGTH: 36″ – 120″
ROLLER CENTERS: 3″, 4″, 6″, 9″, 12″
ROLLERS: 2.5″ dia., 11ga wall tubes with 11/16″ hex cold rolled steel axle, spring retained. Standard A50 bearings are light oil lubricated. Optional bearings include combinations of precision, semi-precision and non-precision construction with light oil or grease packed lubrication. 750 lbs roller capacity.
FRAMES: Standard F70 set high 5″ x 1-1/2″ x 12ga formed steel channel with bolted 1-1/8″ x 1/8″ angle crossties. Optional F71 set low 6″ x 1-1/2″ x 12ga.
ROLL COVERS: Standard carbon steel. Optional roll covers includes Orange Polyurethane, 1/8″ wall or galvanized tube.
CASTERS: 4″ cast iron V-groove and 5″ phenolic.
HANDLE: 1″ pipe with hand grip.
END STOP: Fixed style, near handle.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.