Chain driven roller conveyor is the workhorse of heavy-duty material handling and is an excellent choice for moving pallets, tires, drums, structural steel, and other heavy loads. Its rugged welded frame construction can withstand the most abusive of environments. Chain driven roller conveyor also provides versatility in production lines because it can easily incorporate with chain transfers, turntables, and curves.
EFFECTIVE WIDTH: 12″ to 60″
LENGTH: 48″ to 600″
BEGINNING HEIGHT ELEVATION: 7″ to 120″
ENDING HEIGHT ELEVATION: 7″ to 120″
ROLLER CENTERS: 3″. For other spacing see model CDLR25
ROLLERS: 2.50″ dia. x 11ga. mild steel tube with 11/16″ hex axle, spring retained, with precision, greased packed ABEC bearings, and #60 sprockets. Standard roller surface is carbon steel. Roller options include: galvanized roller tube, polyurethane roller sleeves, and Ultrex accumulation sleeves.
FRAME CONSTRUCTION: Standard frame includes structural channel 6″x8.2# with rollers set 1-3/4″ low.
Other frame options include:
- Formed 6″x8ga. channel with rollers set 1-3/4″ low (bolted frame)
DRIVE LOCATION: Standard drive is mounted high near center of conveyor length on chain box side. Optional drives include drive mounted low near center.
MOTOR: 1/2 HP to 2 HP, totally enclosed fan cooled motor. Optional inverter duty or power off brake motor also available. Standard voltage is 230/460V/ 3Ph/ 60Hz. Optional voltages include: 115V/1Ph /60Hz, 208V/1Ph/ 60Hz, 230V/ 1Ph/ 60Hz and 575V/ 3Ph/ 60Hz.& 24VDC.
SPEED: Available in fixed speeds from 10 – 120 FPM (feet per minute)
CONVEYOR COLOR: Powder coated blue (RAL 5017). All guarding is yellow (RAL 1023) and moving parts are bright red orange( RAL 2008). Click HERE to see other standard color options. Custom colors also available.
Conveyor Control Options:
- Variable Speed Controller
- Combination motor starter with disconnect, fixed speed
- Combination motor starter with disconnect, variable speed
- PLC (programmable logic controller) with HMI (human machine interface)
- No Controls (provided by others)
Optional
- Photo eye sensor(s)
- Emergency Stop button(s)
| Load Capacity @ 60 FPM (LBS) Center Drive, 3″ Roller Centers, 20 FT Length | |||
| HP | Width | ||
| 12″ | 36″ | 60″ | |
| 1/2 | 700 | 200 | – |
| 3/4 | 1900 | 1450 | 350 |
| 1 | 2800 | 2300 | 1800 |
| 1 1/2 | 4500 | 4000 | 3500 |
| 2 | 6200 | 5700 | 5250 |
| Load Capacity @ 30 FPM (LBS) Center Drive, 3″ Roller Centers, 20 FT Length | |||
| HP | Width | ||
| 12″ | 36″ | 60″ | |
| 1/2 | 2750 | 2300 | 1800 |
| 3/4 | 4500 | 4000 | 3550 |
| 1 | 6200 | 5750 | 5250 |
| 1 1/2 | 11350 | 10900 | 10400 |
| 2 | 18600 | 18100 | 17600 |
| Recommended Maximum Conveyor Load Capacity is 1000 LBS Per Linear Foot – Not To Exceed Capacity Above. For Heavier Loads, Consult Factory. | |||
Options:
- Guardrail
- Fork truck barriers
Supports:
- No floor supports
- 5″ structural channel jack bolt supports, adjustable 1″ to 2″ (model SPJ5)
- 5″ formed channel jack bolt supports, adjustable 1″ to 2″ (model SPJ5)
- Supports can be provided with optional adjustable top plate for conveyors on an incline or decline
- Floor supports can be provided on 5′ or 10′ centers. It is recommended that conveyors wider than 32″ have supports on 5′ centers. It is also recommended that conveyors with height elevations above 35″ use knee braces (model KB18)
