Model CDRC19 is a chain driven roller conveyor curve commonly used with our CDLR19. It offers a positive drive for negotiating 90, 45, and 30 degree turns. The rugged 1.9″ diameter rollers are ideal for medium to heavy duty applications like drums, wheels, and totes.
EFFECTIVE WIDTH: 6″ – 48″
DEGREES: 45°, 90°, 180°
HEIGHT ELEVATION: 6.5″ to 120″
ROLLERS: 1.90″ dia. x 12ga. mild steel tube with 7/16″ hex axle, spring retained, with precision, greased packed ABEC bearings, and #40 sprockets. Standard roller surface is carbon steel. Roller options include: 9ga. mild steel tube, cotter pin retained axle, galvanized roller tube, polyurethane roller sleeves, and Ultrex accumulation sleeves. Click the following link for additional roller details.
SPEED: Available in fixed speeds from 10 – 100 FPM
DRIVE: Standard drive is mounted high near center of conveyor length on chainbox side. Optional drives include drive mounted low or drive mounted below and within, near center.
FRAME: Standard frame includes 5” channel on chain box side and 3-1/2”
channel on opposite side with roller set high in frame. Optional frame options
include 5” channel on opposite side with roller set low in frame, or structural
5@6.7# both sides with roller set low.
MOTOR: 1/2 HP to 2 HP, totally enclosed fan cooled inverter-duty motor. Optional power off brake motor or non-inverter-duty motor. Standard voltage is 230/460V/ 3Ph/ 60Hz. Optional voltages include: 115V/1Ph /60Hz, 208V/1Ph/ 60Hz, 230V/ 1Ph/ 60Hz and 575V/ 3Ph/ 60Hz. 24VDC Motorized driven roller (MDR) also available.
ROLLER BEARING: Precision, grease packed bearings, 7/16” hexagon axles.
ROLLER COVERS: Optional roller covers include galvanized roller tube,
polyurethane roller sleeves, Ultrex accumulation sleeves.
SUPPORT CENTERS: Standard supports are floor supports on 10’ center.
CONVEYOR COLOR: OSHA safety blue powder (RAL 5017). All guarding is yellow (RAL 1023) and moving parts are bright red orange (RAL 2008). Optional colors available.
As standard, controls are not included (provided by others).
Control Options:
- Variable Speed Controller
- Combination motor starter with disconnect, fixed speed
- Combination motor starter with disconnect, variable speed
- PLC (programmable logic controller) with HMI (human machine interface)
Optional:
- Photo eye sensor(s)
- Emergency Stop button(s)
- At-Motor Disconnect Switch
Options:
- Fork Truck Barriers
- Conveyor End Stop, model ESTOP3
- Guardrail & Funnel Guides
Supports:
- No floor supports
- 4″ structural or formed channel supports w/ jack bolt, adjustable 1″ to 2″ (model SPSJ4 or SPJ4)
- 5″ structural or formed channel supports w/ jack bolt, adjustable 1″ to 2″ (model SPSJ5 or SPJ5)
- 6″ structural or formed channel supports w/ jack bolt, adjustable 1″ to 2″ (model SPSJ6 or SPJ6)
- Supports can be provided with optional adjustable top plate for conveyors on an incline or decline.
- Floor supports can be provided on 5′ or 10′ centers. It is recommended that conveyors wider than 32″ have supports on 5′ centers. It is also recommended that conveyors with height elevations above 35″ use knee braces (model KB18)
