CDLR19 - Chain driven live roller conveyor

CDLR19 – Chain Driven Roller, 1900 Series

EFFECTIVE WIDTH: 6″ to 48″

LENGTH: 36″ to 600″

BEGINNING HEIGHT ELEVATION: 6.5″ to 120″

ENDING HEIGHT ELEVATION: 6.5″ to 120″

ROLLER CENTERS: 4″, 6″, 8″, or 12″

ROLLERS: 1.90″ dia. x 12ga. mild steel tube with 7/16″ hex axle, spring retained, with precision, greased packed ABEC bearings, and #40 sprockets. Standard roller surface is carbon steel. Roller options include: 9ga. mild steel tube, cotter pin retained axle, galvanized roller tube, polyurethane roller sleeves, and Ultrex accumulation sleeves.

FRAME CONSTRUCTION: Standard frame includes formed 8ga. channel, 5″ on chain box side & 3-1/2″ on opposite side with rollers set 1/4″ high. Other frame options include:

  • Formed 6″x8ga. channel with rollers set 1-1/4″ low
  • Structural channel, 5″x6.7# with rollers set low

DRIVE LOCATION: Standard drive is mounted high near center of conveyor length on chain box side. Optional drives include drive mounted low or drive mounted below and within frame, near center.

MOTOR: 1/2 HP to 2 HP, totally enclosed fan cooled motor. Optional inverter duty or power off brake motor also available. Standard voltage is 230/460V/ 3Ph/ 60Hz.  Optional voltages include:  115V/1Ph /60Hz,  208V/1Ph/ 60Hz,  230V/ 1Ph/ 60Hz  and  575V/ 3Ph/ 60Hz.& 24VDC.

SPEED: Available in fixed speeds from 10 – 100 FPM (feet per minute)

CONVEYOR COLOR: Powder coated blue (RAL 5017). All guarding is yellow (RAL 1023) and moving parts are bright red orange( RAL 2008). Click HERE to see other standard color options. Custom colors also available.

Conveyor Control Options:

  • Variable Speed Controller
  • Combination motor starter with disconnect, fixed speed
  • Combination motor starter with disconnect, variable speed
  • PLC (programmable logic controller) with HMI (human machine interface)
  • No Controls (provided by others)

Optional

  • Photo eye sensor(s)
  • Emergency Stop button(s)
Load Capacity @ 60 FPM (LBS) Center Drive, 4″ Roller Centers
HP Width
12″ 30″ 48″
 1/2 1550 1350 1150
 3/4 2450 2250 2100
1 3350 3150 3000
1 1/2 5150 4950 4800
2 7500 7500 7500
Load Capacity @ 30 FPM (LBS) Center Drive, 4″ Roller Centers
HP Width
12″ 30″ 48″
 1/2 3350 3150 3000
 3/4 5150 4950 4800
1 7500 7500 7500
1 1/2 7500 7500 7500
2 7500 7500 7500
Maximum unit load per linear foot of conveyor is 400 pounds – Not to exceed capacity above

Options: 

  • Guardrail
  • Fork truck barriers

Supports: 

  • No floor supports
  • 5″ structural channel jack bolt supports, adjustable 1″ to 2″ (model SPJ5)
  • 5″ formed channel jack bolt supports, adjustable 1″ to 2″ (model SPJ5)
  • Supports can be provided with optional adjustable top plate for conveyors on an incline or decline
  • Floor supports can be provided on 5′ or 10′ centers. It is recommended that conveyors wider than 32″ have supports on 5′ centers. It is also recommended that conveyors with height elevations above 35″ use knee braces (model KB18)