Model NPTG19 non-powered gravity conveyor turntable provides a transition that can be used in a pass thru conveyor line. The transition section can be reconfigured to make 90° turns at the intersection of two gravity conveyor lines.

NPTG19 – NON-POWERED TURNTABLE WITH 1900 SERIES GRAVITY CONVEYOR

BETWEEN FRAMES: 27″, 33″, 39″, 45″, 51″

ELEVATION: 13.0″ – 36.0″

ROTATION: 360 degrees with spring loaded detents at 90 degree increments.

ROLLER CENTERS: 4″

ROLLERS: 1.9” diameter, 12ga wall tube with precision grease packed bearings or 1.9″ diameter, 9ga wall tube with semi-precision grease packed bearings. All rollers with 7/16” hex cold rolled steel axles, spring retained.

TURNTABLE PLATE: Standard is 1/2″ plate with slewing ring center bearing.

ROLL COVERS: Optional orange polyurethane, 1/8″ wall. Galvanized tube available for 12ga roller.

TRANSITION ROLLERS: Standard set for pass through conveyor line. Optional transition section can be configured for 90 turns.

FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.