Model PTTC25 is a heavy duty manual transfer car and is typically used to transfer products across an aisle way in parallel conveying lines.

PTTC25 – PASS THRU TRANSFER CAR WITH 2.50″ DIAMETER 11 GA. ROLLERS

BETWEEN FRAMES: 15″ – 61″

LENGTH: 60″ – 120″

ROLLER CENTERS: 3″, 4″, 5″, 6″, 9″, 12″

ROLLERS: 2.5″ dia., 11ga wall tubes with 11/16″ hex cold rolled steel axle, spring retained. Standard A50 bearings are light oil lubricated. Optional bearings include combinations of precision, semi-precision and non-precision construction with light oil or grease packed lubrication. 750 lbs roller capacity.

FRAMES: Standard F76 set high 5″ x 1-1/2″ x 12ga formed steel channel with bolted 1-1/8″ x 1/8″ angle crossties. Optional F77 set low 6″ x 1-1/2″ x 12ga.

ROLL COVERS: Standard carbon steel. Optional Orange Polyurethane, 1/8″ wall or galvanized tube.

CASTERS: 4″ cast iron V-groove and 5″ phenolic.

HANDLE: 1″ pipe with hand grip.

FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.