Model PTTC19 is a medium duty manual transfer car and is typically used to transfer products across an aisle way in parallel conveying lines.

PTTC19 – PASS THRU TRANSFER CAR WITH 1.90″ DIAMETER 16 GA. ROLLERS

BETWEEN FRAMES: 15″ – 51″

LENGTH: 60″ – 120″

ROLLER CENTERS: 3″, 4″, 5″, 6″

ROLLERS: 1.9″ dia., 16ga wall tube with 7/16″ hex cold rolled steel axles, spring retained. Standard A15 bearings are light oil lubricated. Optional bearings include combination of precision, semi-precision and non precision construction with light oil or grease packed lubrication.

FRAMES: Standard F74 set high 5″ x 1-1/2″ x 12ga formed steel channel with bolted 1-1/8″ x 1/8″ angle crossties. Optional F75 set low 6″ x 1-1/2″ x 12ga.

ROLL COVERS: Standard carbon steel. Optional Orange Polyurethane, 1/8″ wall or galvanized tube.

CASTERS: 4″ cast iron V-groove and 5″ phenolic.

HANDLE: 1″ pipe with hand grip.

FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.