Steel Hinged Belt Conveyors are available in a variety of configurations (Z, L, H) and with a variety of incline angles. Designed for heavy duty use, they are typically configured for use in machining or stamping applications for part or scrap removal.

BELT WIDTH: 8″ – 36″
LENGTH OF INCLINE: 52″ – 324″
BEGINNING ELEVATION: 8″ – 48″
ENDING ELEVATION: 36″ – 126″
SPEED: Available in fixed speeds from 10 – 45 FPM
INCLINED ANGLE: 30°, 45°, 60°
FEEDER LENGTH: 12″ – 120″
NOSEOVER LENGTH: 15″ – 120″
BELT: Standard is 2-1/2” pitch steel hinge, dimpled, standard chain with outer side bars. Optional belts are dimpled or perforated, with or without outer side bars. Optional 1-1/2” steel cleats at various center distances are available.
DRIVE: Standard drive is end drive, overhead, right hand side.
MOTOR: 1/2 HP through 1 HP. Energy efficient, inverter duty and brake motors also available. Voltages include 120/1/60, 230/3/60, 460/3/60 and 575/3/60 & DC Voltage.
SUPPORT CENTERS: Standard supports are on nominal 10’ centers.
CONVEYOR COLOR: OSHA safety blue powder (RAL 5017). All guarding is yellow (RAL 1023) and moving parts are bright red orange (RAL 2008). Optional colors available.
As standard, controls are not included (provided by others).
Control Options:
- Variable Speed Controller
- Combination motor starter with disconnect, fixed speed
- Combination motor starter with disconnect, variable speed
- PLC (programmable logic controller) with HMI (human machine interface)
Optional:
- Photo eye sensor(s)
- Emergency Stop button(s)
- Emergency Stop Cable Pull Switch
- Motor Disconnect Switch mounted near motor, wired with SO cord.