1-3/8 in. Dia. Gravity Roller Spurs are used to divert off, or merge on, main trunk line conveyors at various angles. They are often used when several lines transfer onto a main conveyor line, from work stations or similar applications.

1418SL – GRAVITY SPUR, LEFT HAND FLOW, 1.38″ DIAMETER, 18 GA. ROLLERS

BETWEEN FRAMES: 10″ – 22″ (See chart)

LENGTH: 24″ – 57″ (See chart)

ROLLER CENTERS: 1.5″, 3″, 4.5″, 6″

DEGREE: 30 , 45 (See chart)

ROLLERS: 1.375″ dia., 18 ga. wall galvanized tubes with 1/4″ round cold rolled

steel axles, spring retained. Standard A02 bearings are light oil lubricated. 50 lbs.
roller capacity.

FRAMES: Standard F98 set high 2-1/2″ x 1″ x 12ga formed steel channel with
bolted 1-1/8″ x 12ga angle crossties. Optional F33 set low 3-1/2″ x 1″ x 12ga.

ROLLER SURFACE: Standard galvanized tube. Optional roll covers includes
Orange Polyurethane, 1/8″ wall.

COUPLINGS: Standard Hooks on one end.

FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.