Steel Hinge Belt Conveyors are available in a variety of configurations (Z, L, P, H) and with a variety of incline angles. Designed for heavy duty use, they are typically configured for use in machining or stamping applications for part or scrap removal.
![Steel Hinge Belt Conveyors are available in a variety of configurations (Z, L, P, H) and with a variety of incline angles. Designed for heavy duty use, they are typically configured for use in machining or stamping applications for part or scrap removal.](https://conveyors.lewcoinc.com/wp-content/uploads/2020/04/shbh_large-1024x1024.png)
BELT WIDTH: 8″ – 36″
LENGTH OF INCLINE: 52″ – 324″
BEGINNING ELEVATION: 8″ – 48″
ENDING ELEVATION: 36″ – 126″
SPEED: Available in fixed speeds from 10 – 45 FPM
INCLINED ANGLE: 30°, 45°, 60°
FEEDER LENGTH: 12″ – 120″
NOSEOVER LENGTH: 15″ – 120″
BELT: Standard is 2-1/2” pitch steel hinge, dimpled, standard chain with outer side bars. Optional belts are dimpled or perforated, with or without outer side bars. Optional 1-1/2” steel cleats at various center distances are available.
DRIVE: Standard drive is end drive, overhead, right hand side.
MOTOR: 1/2 HP through 1 HP. Energy efficient, inverter duty and brake motors also available. Voltages include 120/1/60, 230/3/60, 460/3/60 and 575/3/60 & DC Voltage.
SUPPORT CENTERS: Standard supports are on nominal 10’ centers.
CONVEYOR COLOR: OSHA safety blue powder (RAL 5017). All guarding is yellow (RAL 1023) and moving parts are bright red orange (RAL 2008). Optional colors available.