CDLR26 – CHAIN DRIVEN ROLLER, 2607 SERIES

EFFECTIVE WIDTH: 6″ to 64″

LENGTH: 36″ to 600″

BEGINNING HEIGHT ELEVATION: 7″ to 120″

ENDING HEIGHT ELEVATION: 7″ to 120″

ROLLER CENTERS: 4.5″, 6″, 9″, or 12″. For 3″ see model CDDB26

ROLLERS: 2.65″ dia. x 7ga. mild steel tube with 11/16″ hex axle, spring retained, with precision, greased packed ABEC bearings, and #60 sprockets. Standard roller surface is carbon steel. Roller options include: cotter pin retained axle, galvanized roller tube, polyurethane roller sleeves, and Ultrex accumulation sleeves.

FRAME CONSTRUCTION: Standard frame includes structural channel 6″x8.2# on chain box side & 4″x5.4# on opposite side with rollers set 1/4″ high. Other frame options include:

  • Structural channel 6″x8.2# with rollers set 1-3/4″ low
  • Formed 8ga. channel, 6″ on chain box side & 4″ on opposite side with rollers set 1/4″ high (bolted frame)
  • Formed 6″x8ga. channel with rollers set 1-3/4″ low (bolted frame)

DRIVE LOCATION: Standard drive is mounted high near center of conveyor length on chain box side. Optional drives include drive mounted low or drive mounted below and within frame, near center.

MOTOR: 1/2 HP through 2 HP. Energy efficient and inverter duty motors also available. Voltages include 120/1/60, 208/1/60, 230/3/60, 460/3/60, 230/1/60 and 575/3/60 & DC Voltage.

SPEED: Available in fixed speeds from 15 – 150 FPM (feet per minute)

CONVEYOR COLOR: Powder coated blue (RAL 5017). All guarding is yellow (RAL 1023) and moving parts are bright red orange( RAL 2008). Click HERE to see other standard color options. Custom colors also available.

Conveyor Control Options:

  • Variable Speed Controller
  • Combination motor starter with disconnect, fixed speed
  • Combination motor starter with disconnect, variable speed
  • PLC (programmable logic controller) with HMI (human machine interface)
  • No controls (provided by others)

Optional

  • Photo eye sensor(s)
  • Emergency Stop button(s)
Load Capacity @ 60 FPM (LBS) Center Drive, 6″ Roller Centers, 20 FT Length
HP Width
12″ 36″ 60″
 1/2 1550 1300 1050
 3/4 2500 2250 2000
1 4100 3850 3600
1 1/2 6300 6050 5850
2 10300 10100 9850
Load Capacity @ 30 FPM (LBS) Center Drive, 6″ Roller Centers, 20 FT Length
HP Width
12″ 36″ 60″
 1/2 3500 3900 3650
 3/4 6350 6100 5850
1 10350 10100 9850
1 1/2 15650 15450 15200
2 21000 20750 20500
Recommended Maximum Conveyor Load Capacity is 1000 LBS Per Linear Foot – Not To Exceed Capacity Above. For Heavier Loads, Consult Factory.

Options: 

  • Guardrail
  • Fork truck barriers

Supports: 

  • No floor supports
  • 5″ structural channel jack bolt supports, adjustable 1″ to 2″ (model SPJ5)
  • 5″ formed channel jack bolt supports, adjustable 1″ to 2″ (model SPJ5)
  • Supports can be provided with optional adjustable top plate for conveyors on an incline or decline
  • Floor supports can be provided on 5′ or 10′ centers. It is recommended that conveyors wider than 32″ have supports on 5′ centers. It is also recommended that conveyors with height elevations above 35″ use knee braces (model KB18)