EFFECTIVE WIDTH: 6″- 60″
BEGINNING ELEVATION: 8″ – 120″
LENGTH: 48″ – 240″
ENDING ELEVATION: 8″ – 120″
SPEED: Available in fixed speeds from 20 – 110 FPM
ROLLER CENTERS: 3-1/2″, 4″, 4-1/2″, 6″
DRIVE: Standard drive is mounted near the center of the conveyor length on belt
guard side. Up to 20 conveyor rollers can be driven from each side of the drive
roller. Additional drives are required to extend the conveyor length.
FRAME: Standard frame includes 6″ channel on chain box side and 4″ channel on
opposite side with roller set high in frame. Optional frame options include 6″
channel on opposite side with roller set low in frame, or structural 6@8.2# &
4@5.4# with rollers set high, or structural 6@8.2# both sides with roller set low.
MOTOR: 1/2 HP through 2 HP, Energy efficient and inverter duty motors are also
available along with Motorized Drive Rollers (MDR). Voltages include 115/1/60,
208/3/60, 230/3/60, 460/3/60 and 575/3/60 along with DC voltages for MDR
drives.
ROLLERS: Standard – 2.50″ diameter, 11 ga wall tube with 11/16″ hex cold rolled
steel axles, spring retained. Standard bearings are ABEC precision, grease packed.
Rollers include Poly-V sleeves for (8) rib belts.
ROLLER COVERS: Optional galvanized roller covers include polyurethane roller
sleeves, Ultrex accumulation sleeves.
SUPPORT CENTERS: Standard supports are 5″ formed channel with jack bolt
adjustment floor supports on 5’ centers.
CONVEYOR COLOR: OSHA safety blue powder (RAL 5017). All guarding is yellow (RAL 1023) and moving parts are bright red orange (RAL 2008). Optional colors available.
