PLV19 – POLY-V DRIVEN ROLLER CONVEYOR

EFFECTIVE WIDTH: 6″- 48″

BEGINNING ELEVATION: 7″ – 120″

LENGTH: 36″ – 240″

ENDING ELEVATION: 7″ – 120″

SPEED: 15 – 110 FPM

ROLLER CENTERS: 3″, 4″, 6″

DRIVE: Standard drive is mounted near the center of the conveyor length on belt

guard side. Up to 20 conveyor rollers can be driven from each side of the drive

roller. Additional drives are required to extend the conveyor length.

FRAME: Standard frame includes 5″ channel on chain box side and 3-1/2″ channel

on opposite side with roller set high in frame. Optional frame includes 5″ channel

on opposite side with roller set low in frame.

MOTOR: 1/2 HP through 2 HP, Energy efficient and inverter duty motors are also

available along with Motorized Drive Rollers (MDR). voltages include 115/1/60,

208/3/60, 230/3/60, 460/3/60 and 575/3/60 along with DC voltages for MDR

drives.

ROLLERS: Standard galvanized roller – 1.90″ diameter, 16 ga wall tube with 7/16″

hex cold rolled steel axles, spring retained. Standard bearings are ABEC precision,

grease packed. Rollers include Poly-V sleeves for (4) rib belts.

ROLLER COVERS: Optional roller covers include polyurethane roller sleeves,

Ultrex accumulation sleeves.

SUPPORT CENTERS: Standard supports are heavy duty floor supports on 10’

centers. Optional 4″ formed channel with jack bolt adjustment.

FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors

include green, beige, gray, orange, black and yellow.