BETWEEN FRAMES: 9″ – 39″
BEGINNING ELEVATION: 6.75″- 48″
LENGTH: 6″ – 1200″ see note below in DRIVE
ENDING ELEVATION: 6.75″ – 48″, Consult factory for incline/decline applications.
ROLLER: 1.9″ diameter, 16 gage galvanized tube with 7/16″ hex, cold rolled steel
axle, spring retained with precision ABEC1 bearings.
ROLLER CENTERS: 3″
CONVEYOR SPEED: 20 – 250 FPM
DRIVE BELT: Standard belt is 83A durometer.
DRIVE: 24 volt DC motor with drive spool capable of driving up to (16) rollers
maximum. Conveyors of longer lengths require multiple drive motors. Standard
power supply is 40 amps and is capable of supplying power to up to 40 motors.
CONTROLS: Zero pressure accumulation cards and zone sensor photo eyes
included as standard.
ROLLER COVERS: Standard roller is galvanized steel. Optional polyurethane
FRAME: Conveyor frame is 6.50″ high, 12 gage steel channel with bolted cross
SUPPORT CENTERS: Standard supports are floor supports on 10’ centers.
Optional supports on 5’ centers. Ceiling supports are also available.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.