1.9″ Diameter 16 ga. Gravity Roller Spurs are used to divert off, or merge on, main trunk line conveyors at various angles. They are often used when several lines transfer onto a main conveyor line, from work stations or similar applications.
BETWEEN FRAMES: 13″ – 51″ (See chart)
LENGTH: 28″ – 106″ (See chart)
ROLLER CENTERS: 3″, 4.5″, 6″
DEGREE: 30 , 45 (See chart)
ROLLERS: 1.9″ dia., 16ga wall tubes with 7/16″ hex cold rolled steel axles, spring
retained. Standard bearings are light oil lubricated. Optional bearings include
combinations of precision, semi-precision, and non-precision construction with
light oil or grease packed lubrication.
FRAMES: Standard F97 set high 3-1/2″ x 1″ x 12ga formed steel channel with
bolted 2″ x 8ga galvanized angle crossties. Optional F38 set low 4-1/2″ x 1-1/2″ x
ROLLER SURFACE: Optional Orange Polyurethane, 1/8″ wall or galvanized tube.
COUPLINGS: Bolted butt couplers standard on one end of channel.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.