LEWCO replacement sprocketed rollers are suitable for any existing LEWCO or other brand of CDLR conveyor. Need something custom? We can match almost any existing bearing, sprocket, and length.
BETWEEN FRAME: 10.375″ – 61″
ROLLER CONSTRUCTION: Round tube, 2.6″ Diameter, 7 Gauge, carbon steel, pickled & oiled.
SPROCKETS: #60 “A” plate with 15 teeth, heat-treated.
BEARINGS: Precision, grease packed, ABEC-1 with steel cup, 11/16″ hex axle, front & back rubber seals, rated for – 4°F. to 180°F.
AXLE RETENTION: 3″ long spring, one side. Optional cotter pins.
ROLLER TUBE MATERIAL & COVER OPTIONS:
- Standard – Bare Carbon Steel, Pickled & Oiled
- Zinc Plated Carbon Steel
- Orange Polyurethane, 1/8” Thick (Carbon steel tube)
- Black UHMW/ PE ULTREX® Sleeves, 3″ O.D. (Carbon steel tube)
NOTE: Axle & sprocket are carbon steel unless specified otherwise.
Drive Rollers have a round drive shaft at one or both ends.
Model: R2607SD
*Click Part # to see Drawing*
CVS6019-A63-* For rollers set high in frame with drive mounted high or low. Internal roller bearing one side.
CVS6020-* For rollers set low in frame with drive mounted high or low. No internal roller bearing.
CVS6021-A63-* For rollers set high in frame with drive mounted below & within frame. Internal roller bearing one side.
CVS6022-* For rollers set low in frame with drive mounted below & within frame. No internal roller bearing.
