LEWCO replacement rollers are suitable for any existing brand of conveyor. We can match almost any existing bearings, as well as standard or custom between-frame dimensions.
BETWEEN FRAME: 10.375″ – 51″
ROLLER CONSTRUCTION: 1.9″ dia. x 12 ga. wall, bare carbon steel, pickled & oiled.
SHEAVE: Carbon Steel, 8 Grooves (For two 4-Rib Belts)
BEARINGS: (A24) Precision, grease packed, ABEC-1 with steel cup, 7/16″ hex axle, front & back rubber seals, rated for – 4°F to 150°F. Other options available.
AXLE RETENTION: 3″ long spring, one side. Optional cotter pins.
LOAD CAPACITY: 260 LBS. *Based on 51″ B.F. with an evenly distributed load.
Roller capacity may be limited to conveyor frame capacity.
ROLLER TUBE & COVER OPTIONS:
- Standard – Bare Carbon Steel, Pickled & Oiled
- Galvanized Steel
- Stainless Steel Tube & Axle
- Zinc Plated Carbon Steel
- Orange Polyurethane, 1/8” Thick (Carbon steel tube)
- Black UHMW ULTREX® Sleeves, 2-3/8″ O.D. (Carbon steel tube)
Note: Axle & Sheave are carbon steel unless specified otherwise.
