Used to stop non-powered/ gravity rollers from spinning. A pneumatically activated steel channel with a high friction top surface presses against the bottom of a series of non-powered conveyor rollers to prevent them from turning. When air pressure (60 psi or more) is sent to the brake, the brake releases from the rollers. Removing that air pressure allows the spring to return the brake channel against the bottom of the rollers. Brake will still stay engaged in the event of air pressure loss.
BETWEEN FRAMES: 6″ – 51″
ROLLER CENTERS: 2″, 3″, 4″
ROLLERS: 1916 Roller – 16 ga wall tube. 1912 Roller – 12 ga wall tube. 1909 Roller – 9 ga wall tube. All rollers 1.9″ dia with 7/16″ hex cold rolled steel axels, spring retained. Standard bearings are light oil lubricated. Optional bearings include combinations of precision, semi-precision and non precision construction with light oil or greased packed lubrication.
MOUNTING: Escapement frame mounts to the 7/16″ hex holes of the conveyor frame.
OPERATION: Extending the cylinders engages the brake.
ROLL COVERS: Optional Orange Polyurethane 1/8″ wall. Galvanized tube available for 1916 and 1912 rollers.
CYLINDERS: Two double acting 1″ bore 1/2″ stroke pneumatic cylinders.
CONTROLS: Not included. Optional:
- Hand operated pneumatic control valve, model VS1
- Foot operated pneumatic control valve, model VS2 or VS3
AIR REQUIREMENTS: Requires 30-40 psi air pressure of clean, filtered air at consumption of approximately 0.05 cubic feet per cycle. Optional filter/regulator/lubricator available. NOTE: Pressure loss can occur over extended periods with no use.
COLOR: Bright red orange (RAL 2008) per OSHA safety standards for moving parts.




