Model PCS19 pneumatic conveyor stop, features a standard 1.9

Model: PCS19

BETWEEN FRAMES: 13″ – 51″

FRAME DEPTH: 3.5″ – 10″

STOP: Standard Roller 1.9″ dia., 12 ga. wall tubes with 7/16 hex cold rolled steel
axles, spring retained. Optional 3/8″ flat bar stop.

CYLINDER: Double acting 2″ bore x 2″ stroke pneumatic cylinder.

OPERATION: Extending the cylinder engages the escapement stop.

AIR REQUIREMENTS: Standard requires 30-40psi of clean, filtered, regulated air
at consumption of approximately 0.005 cubic feet per stroke. Optional
filter/regulator/lubricator available. NOTE: Pressure loss can occur over extended periods with no use.

VALVE: 24VDC, single solenoid, 2 position, spring return.

COLOR: OSHA safety blue powder (RAL 5017). All guarding is yellow (RAL 1023) and moving parts are bright red orange (RAL 2008). Optional colors available.