T02C25 – CHAIN TRANSFER, 1,500 LB. CAPACITY, EXTERNAL DESIGN WITH CDLR25 CONVEYOR

EFFECTIVE WIDTH (EW): 31″ to 61″

ELEVATION: 12″ top of roller minimum

LENGTH(LG) : 60″ to 120″

NUMBER OF STRANDS (NS): 2, 3 or 4

SPEED: 30 – 60 Feet Per Minute

ROLLER CENTERS (RC): 4″, 4-1/2″, 6″

CHAIN CENTERS (TC): 12″ to 48″

MOTOR: 3/4 HP through 1 HP. Energy efficient and inverter duty motors also available. Voltages include 120/1/60, 230/3/60, 460/3/60, 575/3/60 & DC Voltage.

ROLLER BEARING: Precision ABEC style with 11/16″ hexagon axle

CHAIN: #C60, single pitch flat top conveyor chain, 3/4″ pitch

AIR REQUIREMENTS: Transfer lift is pneumatically actuated, requires approximately 0.10 Ft³ of 60 PSI air per lift cycle. Includes FLR unit and (2) position double solenoid valve, 120 volt AC or 24 volt DC coils.

ELECTRICAL REQUIREMENTS: Includes up and down position proximity switches, 20 to 250 volt AC/DC, prewired and terminated in 6” square junction box on outside of conveyor frame. Photo-eye sensor available as option for product detection.

STOP: Fixed or retractable product stops available as an option

ROLLER COVER: Standard roller finish is carbon steel. Options for galvanized steel, urethane covers, or Ultrex accumulation sleeves also available

SUPPORTS: Minimum top of roller elevation is 12”, supports available for up to 48” elevation

FRAME FINISH: Standard finish is OSHA safety blue. Optional colors include green, beige, gray, orange, black and yellow