The CDZA25 Model conveyor is a zero pressure, chain driven live roller conveyor. Designed to accumulate heavy loads such as filled pallets, drums, and containers, with no back pressure. These units come equipped with zone control logic for easy set-up of cascade or slug release modes.
EFFECTIVE WIDTH: 12″ – 60″
LENGTH: 72″ – 900″
BEGINNING ELEVATION: 7″ – 120″
ENDING ELEVATION: 7″ – 120″
SPEED: 10 – 60 FPM
ROLLER CENTERS: 4.5″, 6″
ZONE LENGTH: 36″, 42″, 45″, 48″, 54″, 60″, 63″, 66″, 72″
DRIVE: Standard drive is mounted high near end of conveyor length on chainbox side. Optional drives include drive mounted low near end.
FRAME: Standard frame includes 6” formed channel on both chain box side and opposite side with roller set low in frame. Optional frame include 6” structural channel on both sides with roller set low in the frame.
MOTOR: 1/2 HP through 2 HP. Energy efficient and inverter duty motors also available. Voltages include 120/1/60, 230/3/60, 460/3/60 and 575/3/60 & DC Voltage.
ROLLER BEARING: Precision, grease packed bearings, 11/16” hexagon axles.
ROLLER COVERS: Standard roller surface is carbon steel. Optional roller covers for 2.5″ rollers includes galvanized roller tube, polyurethane roller sleeves, Ultrex accumulation sleeves.
SUPPORT CENTERS: Standard supports are floor supports on 5’ center.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.